Free Download Resetter Canon MX 360 / MX 366
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error P07, blink 7 times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.
Printer:
Canon Pixma MX360, MX366, MX368
Reset Canon MX360, MX366, MX368
Step 1: Enter Service Mode
1. Turn off the printer.
2. Press and hold the Stop/Reset/Resume button.
3. Press and hold the Power/On button.
4. Release the Stop/Reset/Resume button (the Power/On button is still pressed).
5. Press and releasing the Stop/Reset/Resume button 4 times.
6. Press and hold the Stop/Reset/Resume button.
7. Release the Power/On and Stop/Reset/Resume buttons together.
After the both buttons are released, the Power/On indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.
Step 2: Reset Canon MX360 series
To reset the Canon MX360, MX366, MX368 can be done with (select one):
a. Service Tool v.1074
b. Service Tool v.3400
a. Reset with Service Tool v.1074
· Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
· Extract file and open Service Tool
· Load paper
· Clear Ink Counter, click MAIN (1)
· Wait the printer finish printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer ready for use
b. Reset with Service Tool v.3400
· Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
· Extract file and open Service Tool
· Load paper
· Clear Ink Counter, select MAIN (1)
· Set (2)
· Wait the printer finish printing D=000.0
· Click OK
· Close Service Tool
· Turn off printer (wait 10 seconds)
· Turn on printer
· Printer ready for use
Service Tool v.3400
Service Tool v.1074
0 Response to "Free Download Resetter Canon MX 360 / MX 366"
Post a Comment